Asko Washing Machine

Asko W6021 Washing Machine

Model # W6021

The W6021 is an Asko washing machine that Asko carried in the United States and has since dropped. It is documented in Asko’s United States control-panel reference pages, between 2001 and 2005. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The W6021 is discontinued and has been for a long time; it is not a current model and nothing here should be read as saying otherwise. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's United States control-panel reference pages, between 2001 and 2005
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Water leaking from under the cabinet during fill or drain

02

The machine filling slowly or not filling at all

03

The cabinet walking across the floor on a fast spin

04

A program stopping part-way with the drum still full

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko W6021 Washing Machine FAQ

It appears in Asko's United States control-panel reference pages, between 2001 and 2005. That is what places the W6021 in the United States market rather than in another country's range.

Not all of them. The W6021 was a United States model between 2001 and 2005 and has been out of production since. Common wear parts are the ones most often still obtainable; electronics, trim and anything model-specific are the ones that run out. Whether the part your machine needs still exists is the first question, not the last.

Not repeatedly. If the drum is still holding water, switch the W6021 off at its supply and close the water supply, then leave it until it has been looked at - restarting a machine that cannot drain is the usual way a drain fault becomes a leak.

Need a repair? We're ready to help. Call Now