Asko Dishwasher

Asko D3731 Dishwasher

Model # D3731

The D3731 is an Asko dishwasher that was sold in the United States and is no longer made. It is documented in the current folder of Asko USA’s own manual library, in 2006. The record for it is an Asko USA use and care guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D3731 is discontinued, and at this distance the age of the machine is the first thing a visit has to account for. At this age the first question is not what has failed but whether the part that has failed can still be had. A technician who cannot source it should say so instead of quoting the work regardless. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the current folder of Asko USA's own manual library, in 2006
  • Covered by an Asko USA use and care guide in English for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

The detergent dispenser not opening during the wash

02

A cycle running far longer than it used to

03

The drain pump running on without clearing the sump

04

Controls unresponsive or the display blank at the start of a cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D3731 Dishwasher FAQ

Asko USA's own manual library held a use and care guide for the D3731 in English, filed among the models Asko no longer sold, in 2006.

No. The D3731 is discontinued and has been for many years - it was a United States model in 2006. Anything that describes it as a current model is wrong.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the D3731 here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now