Asko Dishwasher

Asko D3450 Dishwasher

Model # D3450

The D3450 is a discontinued Asko dishwasher from the United States range. It is documented in Asko’s main United States dishwasher index, between 2003 and 2006. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D3450 is long discontinued. It was a United States model between 2003 and 2006 and it has not been in the range since. Age does not make a machine undiagnosable; it makes the parts question the first question rather than the last one. That question gets asked before any work is committed to. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's main United States dishwasher index, between 2003 and 2006
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Loads coming out wetter than they used to at the end of drying

02

Water left standing in the base of the tub when the program ends

03

A program stopping part-way through with the door still locked

04

Dishes coming out gritty or filmed after a full program

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D3450 Dishwasher FAQ

Because the surviving United States record for the D3450 names the model and where Asko listed it, between 2003 and 2006, without a published specification sheet. Rather than borrow figures from a neighbouring model, nothing is quoted; the serial number plate on the machine is the authority.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a D3450 a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

No - stop running the D3450 and leave it alone until it has been looked at. A machine that is not clearing its sump can put water on the floor on the next cycle, and repeated attempts tend to turn a drain fault into a bigger one.

Need a repair? We're ready to help. Call Now