Asko Dishwasher

Asko D3350 Dishwasher

Model # D3350

The D3350 is a discontinued Asko dishwasher from the United States range. It is documented in Asko’s main United States dishwasher index, between 2003 and 2006. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D3350 is long discontinued. It was a United States model between 2003 and 2006 and it has not been in the range since. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's main United States dishwasher index, between 2003 and 2006
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Dishes coming out gritty or filmed after a full program

02

Water on the floor at the front of the machine

03

The door latch not holding, so a program will not start

04

The detergent dispenser not opening during the wash

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D3350 Dishwasher FAQ

It appears in Asko's main United States dishwasher index, between 2003 and 2006. That is what places the D3350 in the United States market rather than in another country's range.

No. The D3350 is discontinued and has been for many years - it was a United States model between 2003 and 2006. Anything that describes it as a current model is wrong.

No - stop running the D3350 and leave it alone until it has been looked at. A machine that is not clearing its sump can put water on the floor on the next cycle, and repeated attempts tend to turn a drain fault into a bigger one.

Need a repair? We're ready to help. Call Now