Asko Dishwasher

Asko D1716SS Dishwasher

Model # D1716SS

The D1716SS is the stainless steel front of the Asko D1716, coded SS in the SKU table of Asko Inc.’s own United States Product Guide, form 051101-0530, dated 2002. Everything that letter pair says is about the panel facing the room. The D1716SS was printed next to the D1716B, the D1716BI and the D1716W, and the sensible reading of that table is that a kitchen chose a colour rather than a different dishwasher.

Where that becomes useful is at the counter of a parts supplier. If a component for your machine turns up listed under one of the other three codes, that is not automatically the wrong part – it is usually the same part filed under a sibling front. The exceptions sit on the door. No published specification for the D1716SS was recovered, so no figure is stated for it, and since the model is long discontinued the article number on the serial number plate is what a parts order rests on.

Key Features

  • Printed in the SKU table of Asko Inc.'s own United States Product Guide, form 051101-0530, dated 2002
  • Asko's own SKU table reads the SS suffix as Stainless Steel
  • Finish SKU of the D1716; the machine behind the front is shared with the other three codes
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Dishes coming out gritty or filmed after a full program

02

The door latch not holding, so a program will not start

03

Controls unresponsive or the display blank at the start of a cycle

04

The drain pump running on without clearing the sump

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D1716SS Dishwasher FAQ

Yes, in everything but the front. The SS suffix on the D1716SS is Asko's own SKU code for Stainless Steel in the 2002 United States Product Guide, and it marks the finish rather than a separate machine.

Nothing published says so. The honest position is that the suffix records the finish and that no published specification for the D1716SS was recovered, so door and hinge parts are matched to the article number on the machine rather than to an assumption about the panel.

The model name, the article number and the serial number, all three of which are on the serial number plate of the D1716SS. Asko asks for all three because the model name alone does not identify the build, and on a discontinued machine those digits are what decide whether the part still exists.

Need a repair? We're ready to help. Call Now