Asko Dishwasher

Asko D1706 Dishwasher

Model # D1706

The D1706 is an Asko dishwasher that was sold in the United States and is no longer made. It is documented in Asko’s main United States dishwasher index, between 2000 and 2006. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D1706 is long discontinued. It was a United States model between 2000 and 2006 and it has not been in the range since. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's main United States dishwasher index, between 2000 and 2006
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Water on the floor at the front of the machine

02

The door latch not holding, so a program will not start

03

The detergent dispenser not opening during the wash

04

A cycle running far longer than it used to

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D1706 Dishwasher FAQ

No. The D1706 was carried in Asko's main United States dishwasher index, between 2000 and 2006, and was dropped when the range moved on. A number leaving a current catalogue is the ordinary end of a model's life.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a D1706 a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

The parts owners usually ask about sit behind panels carrying both live connections and water connections. The D1706 has to be isolated from power and from the water supply before any of that is opened, and once that is the starting condition it is a service call rather than an owner job.

Need a repair? We're ready to help. Call Now