Asko Dishwasher

Asko 1655 Dishwasher

Model # 1655

The 1655 is an Asko dishwasher that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2006 snapshot. The record for it is an Asko USA use and care guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The 1655 is discontinued and has been for a long time; it is not a current model and nothing here should be read as saying otherwise. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2006 snapshot
  • Covered by an Asko USA use and care guide in English for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Water on the floor at the front of the machine

02

The door latch not holding, so a program will not start

03

The detergent dispenser not opening during the wash

04

A cycle running far longer than it used to

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko 1655 Dishwasher FAQ

No. The 1655 was carried in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2006 snapshot, and was dropped when the range moved on. A number leaving a current catalogue is the ordinary end of a model's life.

No. The 1655 is discontinued and has been for many years - it was a United States model recorded in Asko USA's own manual library in its 2006 snapshot. Anything that describes it as a current model is wrong.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the 1655 here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now