WMC6744PP.S Repair | Asko Appliance Repair

The WMC6744PP.S is an Asko professional washing machine sold in the United States. Asko’s own United States product data files the WMC6744PP.S under Professional, with a loading capacity of 15.4 lb, a maximum spin speed of 1400 rpm and 25 programs. Asko gives the installation type as freestanding.

This is a current model – Asko’s United States catalogue still carried the WMC6744PP.S when that was checked in September 2026. Revisions sharing one model name are separated by the article number, so the serial number plate settles which parts fit rather than the model name on its own.

Key Features

Asko's United States product data files this model under Professional
Loading capacity given by Asko as 15.4 lb
Maximum spin speed given by Asko as 1400 rpm
25 programs, as listed by Asko
Installation type given by Asko as freestanding
Listed in Asko's United States catalogue as of September 2026

Most Common Issues on This Model

01

Controls not responding when a program is selected

02

The drum not spinning up at the end of the cycle, leaving the load soaked

03

Water not draining, with the program stalling before the spin

04

Knocking or grinding from the drum during a fast spin

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Call (844) 677-0530 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko WMC6744PP.S Professional Washing Machine FAQ

It is Asko's own range label for this model in its United States product data, which files the WMC6744PP.S under Professional. Asko does not publish a decoder for its model numbers, so nothing beyond that label is read into the characters themselves here.

Yes. Asko's United States catalogue carried the WMC6744PP.S when that was checked in September 2026, so it is a machine still in the range rather than a legacy one, and parts supply should be the straightforward case.

Not repeatedly. If the drum is still holding water, switch the WMC6744PP.S off at its supply and close the water supply, then leave it until it has been looked at - restarting a machine that cannot drain is the usual way a drain fault becomes a leak.