The 7304 is an Asko tumble dryer that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2003 snapshot. The record for it is an Asko USA owner’s guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.
The 7304 is discontinued and has been for a long time; it is not a current model and nothing here should be read as saying otherwise. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.
Key Features
- Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2003 snapshot
- Covered by an Asko USA owner's guide in English for this model
- Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
- Discontinued
Most Common Issues on This Model
Controls dead with no display at the start of a program
The load coming out hot at the edges and damp in the middle
A burning or scorched smell during a cycle
The drum turning but the load still damp when the program ends