Asko Washing Machine

Asko 8005 Washing Machine

Model # 8005

The 8005 is an Asko washing machine that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2006 snapshot. The record for it is an Asko USA owner’s guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The 8005 is long discontinued. It was a United States model recorded in Asko USA’s own manual library in its 2006 snapshot and it has not been in the range since. Age does not make a machine undiagnosable; it makes the parts question the first question rather than the last one. That question gets asked before any work is committed to. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2006 snapshot
  • Covered by an Asko USA owner's guide in English for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Controls not responding when a program is selected

02

The drum not spinning up at the end of the cycle, leaving the load soaked

03

Water not draining, with the program stalling before the spin

04

Knocking or grinding from the drum during a fast spin

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko 8005 Washing Machine FAQ

Because the surviving United States record for the 8005 names the model and where Asko listed it, in the 2006 snapshot of Asko USA's own manual library, without a published specification sheet. Rather than borrow figures from a neighbouring model, nothing is quoted; the serial number plate on the machine is the authority.

No. The 8005 is discontinued and has been for many years - it was a United States model recorded in Asko USA's own manual library in its 2006 snapshot. Anything that describes it as a current model is wrong.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the 8005 here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now