The 20004 is an Asko washing machine that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2003 snapshot. The record for it is an Asko USA owner’s guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.
The 20004 is long discontinued. It was a United States model recorded in Asko USA’s own manual library in its 2003 snapshot and it has not been in the range since. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.
Key Features
- Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2003 snapshot
- Covered by an Asko USA owner's guide in English for this model
- Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
- Discontinued
Most Common Issues on This Model
The drum not spinning up at the end of the cycle, leaving the load soaked
Water not draining, with the program stalling before the spin
Knocking or grinding from the drum during a fast spin
The door interlock not releasing at the end of a program