Asko Washing Machine

Asko 13605 Washing Machine

Model # 13605

The 13605 is an Asko washing machine that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2006 snapshot. The record for it is an Asko USA owner’s guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The 13605 is long discontinued. It was a United States model recorded in Asko USA’s own manual library in its 2006 snapshot and it has not been in the range since. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2006 snapshot
  • Covered by an Asko USA owner's guide in English for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

A program stopping part-way with the drum still full

02

Detergent left sitting in the dispenser drawer after the wash

03

Controls not responding when a program is selected

04

The drum not spinning up at the end of the cycle, leaving the load soaked

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko 13605 Washing Machine FAQ

Asko USA's own manual library held a owner's guide for the 13605 in English, filed among the models Asko no longer sold, in its 2006 snapshot.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a 13605 a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the 13605 here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now