Asko Washing Machine

Asko W6903 Washing Machine

Model # W6903

The W6903 is an Asko washing machine that Asko carried in the United States and has since dropped. It is documented in Asko’s United States family-size laundry listing, between 2008 and 2012. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The W6903 is discontinued and has been for a long time; it is not a current model and nothing here should be read as saying otherwise. Parts for a machine of this age divide into the ones still obtainable, usually the common wear items, and the ones that have run out, usually electronics and trim. Which side a given part falls on is settled before work is quoted, not after. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's United States family-size laundry listing, between 2008 and 2012
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Knocking or grinding from the drum during a fast spin

02

The door interlock not releasing at the end of a program

03

Water leaking from under the cabinet during fill or drain

04

The machine filling slowly or not filling at all

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko W6903 Washing Machine FAQ

No. The W6903 was carried in Asko's United States family-size laundry listing, between 2008 and 2012, and was dropped when the range moved on. A number leaving a current catalogue is the ordinary end of a model's life.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a W6903 a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

Not repeatedly. If the drum is still holding water, switch the W6903 off at its supply and close the water supply, then leave it until it has been looked at - restarting a machine that cannot drain is the usual way a drain fault becomes a leak.

Need a repair? We're ready to help. Call Now