Asko Dishwasher

Asko 1375 Dishwasher

Model # 1375

The 1375 is an Asko dishwasher that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2003 snapshot. The record for it is an Asko USA owner’s guide published in Spanish. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The 1375 is discontinued, and at this distance the age of the machine is the first thing a visit has to account for. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2003 snapshot
  • Covered by an Asko USA owner's guide in Spanish for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Water left standing in the base of the tub when the program ends

02

A program stopping part-way through with the door still locked

03

Dishes coming out gritty or filmed after a full program

04

Water on the floor at the front of the machine

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko 1375 Dishwasher FAQ

It appears in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2003 snapshot. That is what places the 1375 in the United States market rather than in another country's range.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a 1375 a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

No - stop running the 1375 and leave it alone until it has been looked at. A machine that is not clearing its sump can put water on the floor on the next cycle, and repeated attempts tend to turn a drain fault into a bigger one.

Need a repair? We're ready to help. Call Now