Asko Dishwasher

Asko 1303 Dishwasher

Model # 1303

The 1303 is an Asko dishwasher that Asko carried in the United States and has since dropped. It is documented in the folder of Asko USA’s own manual library reserved for models it no longer sold, in its 2006 snapshot. The record for it is an Asko USA use and care guide published in English. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The 1303 is discontinued, and at this distance the age of the machine is the first thing a visit has to account for. Parts for a machine of this age divide into the ones still obtainable, usually the common wear items, and the ones that have run out, usually electronics and trim. Which side a given part falls on is settled before work is quoted, not after. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2006 snapshot
  • Covered by an Asko USA use and care guide in English for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

The door latch not holding, so a program will not start

02

The detergent dispenser not opening during the wash

03

A cycle running far longer than it used to

04

The drain pump running on without clearing the sump

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko 1303 Dishwasher FAQ

It appears in the folder of Asko USA's own manual library reserved for models it no longer sold, in its 2006 snapshot. That is what places the 1303 in the United States market rather than in another country's range.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a 1303 a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the 1303 here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now