Asko Dishwasher

Asko D5644XLCS Dishwasher

Model # D5644XLCS

The D5644XLCS is an Asko dishwasher that was sold in the United States and is no longer made. It is documented in Asko’s United States ADA-compliant dishwasher listing, in 2012. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D5644XLCS is discontinued, and at this distance the age of the machine is the first thing a visit has to account for. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's United States ADA-compliant dishwasher listing, in 2012
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

A program stopping part-way through with the door still locked

02

Dishes coming out gritty or filmed after a full program

03

Water on the floor at the front of the machine

04

The door latch not holding, so a program will not start

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D5644XLCS Dishwasher FAQ

No. The D5644XLCS was carried in Asko's United States ADA-compliant dishwasher listing, in 2012, and was dropped when the range moved on. A number leaving a current catalogue is the ordinary end of a model's life.

No. The D5644XLCS is discontinued and has been for many years - it was a United States model in 2012. Anything that describes it as a current model is wrong.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the D5644XLCS here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now