Asko Dishwasher

Asko D3731XL Dishwasher

Model # D3731XL

The D3731XL is an Asko dishwasher that was sold in the United States and is no longer made. It is documented in the current folder of Asko USA’s own manual library, in 2006. The record for it is an Asko USA use and care guide published in Spanish. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D3731XL is long discontinued. It was a United States model in 2006 and it has not been in the range since. There is a point on a machine this old where the cost of a repair is worth weighing against the machine itself, and a drum bearing or a control board is usually where that point arrives. A pump, a hose, a latch or a heating element normally is not. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in the current folder of Asko USA's own manual library, in 2006
  • Covered by an Asko USA use and care guide in Spanish for this model
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

The detergent dispenser not opening during the wash

02

A cycle running far longer than it used to

03

The drain pump running on without clearing the sump

04

Controls unresponsive or the display blank at the start of a cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D3731XL Dishwasher FAQ

Because the surviving United States record for the D3731XL names the model and where Asko listed it, in 2006, without a published specification sheet. Rather than borrow figures from a neighbouring model, nothing is quoted; the serial number plate on the machine is the authority.

Sometimes, and sometimes not. Machines of this vintage are exactly the ones people pay to keep running, and on a D3731XL a pump, a hose, a latch or a heating element is normally worth doing. A control board or a drum bearing is where the cost of the repair starts to be worth weighing against the machine itself, and that should be said out loud rather than worked around.

It narrows the field rather than naming the part, because a code reports a condition the control saw. No code table is published for the D3731XL here: a meaning taken from a different Asko generation or a different market would not be a safe guide to this machine.

Need a repair? We're ready to help. Call Now