Asko Dishwasher

Asko D1716B Dishwasher

Model # D1716B

The D1716 is the widest finish spread in this part of Asko’s 2002 United States Product Guide, and the D1716B is its black entry. The same SKU table prints the D1716BI in bisque, the D1716SS in stainless steel and the D1716W in white. Four fronts, one machine: the letters after the number are Asko’s own colour codes, not separate model lines, and they change what is on the outside of the door rather than what happens inside the tub.

For a repair that has two consequences. The fault on a D1716B is found on the machine and will read the same as it would on any of its siblings, while anything ordered for the door front belongs to the black SKU specifically. No published specification for the D1716B was recovered, so none is quoted, and because the model is long discontinued the availability of the part is established before the job is priced.

Key Features

  • Printed in the SKU table of Asko Inc.'s own United States Product Guide, form 051101-0530, dated 2002
  • Asko's own SKU table reads the B suffix as Black
  • One of four finishes printed for this dishwasher: B, BI, SS and W
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

A cycle running far longer than it used to

02

The drain pump running on without clearing the sump

03

Controls unresponsive or the display blank at the start of a cycle

04

Loads coming out wetter than they used to at the end of drying

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D1716B Dishwasher FAQ

Four. The 2002 United States Product Guide SKU table lists the D1716B in black alongside the D1716BI in bisque, the D1716SS in stainless steel and the D1716W in white - one machine with four fronts, of which the D1716B is the black one.

In principle a seal is a machine part rather than a finish part, so it is normally common across the four SKUs, but on a D1716B that is checked against the article number rather than assumed. Asko revised machines under one model name, and the plate is what separates the revisions.

No. The D1716B is long discontinued - it appears in a United States Product Guide dated 2002 and has not been in the range since - so before any repair is quoted the question is whether the part the D1716B needs can still be had at all.

Need a repair? We're ready to help. Call Now