Asko Dishwasher

Asko D1716 Dishwasher

Model # D1716

The D1716 is a discontinued Asko dishwasher from the United States range. It is documented in Asko’s main United States dishwasher index, between 2000 and 2006. No published specification for this model was recovered, so none is quoted here; the serial number plate on the machine is the authority.

The D1716 is long discontinued. It was a United States model between 2000 and 2006 and it has not been in the range since. Age does not make a machine undiagnosable; it makes the parts question the first question rather than the last one. That question gets asked before any work is committed to. Whatever is ordered for it is matched to the serial number plate rather than to the model name alone.

Key Features

  • Documented in Asko's main United States dishwasher index, between 2000 and 2006
  • Published specification detail for this model was not recovered; the serial number plate on the machine is the authority
  • Discontinued

Most Common Issues on This Model

01

Controls unresponsive or the display blank at the start of a cycle

02

Loads coming out wetter than they used to at the end of drying

03

Water left standing in the base of the tub when the program ends

04

A program stopping part-way through with the door still locked

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 677-0530 now

FAQ

Asko D1716 Dishwasher FAQ

No. The D1716 was carried in Asko's main United States dishwasher index, between 2000 and 2006, and was dropped when the range moved on. A number leaving a current catalogue is the ordinary end of a model's life.

Not all of them. The D1716 was a United States model between 2000 and 2006 and has been out of production since. Common wear parts are the ones most often still obtainable; electronics, trim and anything model-specific are the ones that run out. Whether the part your machine needs still exists is the first question, not the last.

No - stop running the D1716 and leave it alone until it has been looked at. A machine that is not clearing its sump can put water on the floor on the next cycle, and repeated attempts tend to turn a drain fault into a bigger one.

Need a repair? We're ready to help. Call Now